All You Need
In One Single
Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat
Search here:

  • No products in the cart.


PN: 785C Plating Cell


PN: 785C Plating Cell (without side flow holes, a self contained unit). This acrylic cell is not suited for high alkalyne baths.

SKU: 785C Category:


Cell P/N Lexan PVC Flow Holes Pump Max °F Approx. Volume Lab setting In-tank
785A Yes No Yes No 212 1 Gal. w/ container Yes Yes
785B No Yes Yes No 360 1 Gal. w/ container Yes Yes
785C Yes No No No 212 1/2 Gal. Yes No
800L Yes No No Yes 212 1 Gal. Yes No
800PVC No Yes No No 360 1 Gal. Yes No
492 No Yes Yes No 180 400 Milliliters Yes Yes

The plating cell PN: 785C is a self contained unit without side flow holes specifically designed for precision deposit stress measurements.  This cell is designed for laboratory use. The cell offers a standard geometry with respect to anode size and positioning.  Consistent anode to cathode spacing is maintained.

NOTE: During plating a test strip is exposed to a uniform current density along the legs of the strip. The plating test should be continued until the test strip legs deflect up to 20 units and with a target thickness that does not exceed approximately 100 microinches for the most accurate results. Very low stress may show only 1-2 units.

Plating Cell PN: 785C Features:

  • To be used in a lab setting
  • Two anode pockets for 2 3/8″ (61 mm) x 2 3/8″ (61 mm) anodes
  • Without side flow holes- a self contained unit
  • Leads to each anode from a central contact
  • A clip assembly for positioning the test strip midway between the anodes
  • This cell does not accommodate our heater or pump

Additional information

Weight 4 lbs
Dimensions 9 × 4 × 7 in

You may also like…